USER MANUAL VERSION 1.0

 

iTouch Fuse USER GUIDE:

Everything you need to know about the iTouch Fuse Smartwatch.

Setting up your iTouch Fuse Smartwatch: For the best experience, use the iTouch Wearables app for iPhones and Android phones. A smartphone is required for call, text, calendar, and smartphone app notifications.

 

Charge Your Smartwatch

A fully charged iTouch Fuse has a battery life of up to 30 days (Standby time). Battery life and charge cycles vary with the use and other factors.

1. Plug the charging cable into the USB port on your computer or a UL-certified USB wall
2. Clip the other end of the charging cable to the charging The pins on the charging base must lock securely with the smartwatch. A battery icon appears on the screen to indicate your smartwatch is charging.
3. 

Note: Take off plastic protector film from caseback before charging. Charging fully takes about 1 hour.

 

Navigate iTouch Fuse

iTouch Fuse has a vibrant LCD display and a one-touch button for navigation. Navigate iTouch Fuse by pressing the  button.

The home screen is the watch face of the smartwatch.

• Press the button to switch between features on your
• Hold the button to select and activate a function or Settings for your smartwatch

 

• Manage basic settings including do not disturb, stopwatch, brightness, watch faces, reset and shut- down directly on your Open the Settings menu and tap/hold to adjust.

Power ON

Tap and hold the Home button  until your watch turns on.

 

Power OFF

Tap the Home button  until you arrive at the Settings screen. Then hold the Home button for 3-5 seconds to open the settings option. Tap until you see the ‘Power Off’ screen. Hold Home button for 3-5 seconds until your watch turns off.

 

Update Watch Firmware

To update firmware, go to the menu on the Home page of the app, and tap on Settings. Then tap, Update Firmware. If there is an update available for your watch, you will be able to update it here.

 

Reset Your Smartwatch

Go to the Settings screen on your device, then tap and hold the Home button until you see the Reset button. Then, hold the Home button for 3-5 seconds to reset your iTouch Fuse and clear all data.

 

Set Up with Your Smartphone

The free iTOUCH Wearables app is compatible with most iPhones and Android Phones.

A smartphone is required for call, text, and smartphone app notifications.

 

To get started

1. Please make sure you phone’s Bluetooth is on
2. Find the iTOUCH Wearables app in one of the locations below, depending on your smart device
   • Apple App Store for iPhones
   • Google Play Store for Android Phones

3. Download and install the iTOUCH Wearables App

 

YOUR iTouch Fuse Smartwatch WILL ONLY WORK WITH THE iTOUCH Wearables APP SHOWN ABOVE.

 

This watch only functions with this app and there will be connectivity issues if the incorrect app is used. For more information and links to the apps, go to: www.iTouchwearables.com.

When the app asks you for permission access, we highly encourage the user to allow all notifications & pairing access to their smartphones to completely enjoy your smartwatch experience.

For Android users, you will also have to allow the iTOUCH Wearables app to access notifications in your phone’s native settings. Read more in the Notifications and Messaging section of the manual.

4. Once the app is installed, open it to sign up and create your (We highly encourage the user to allow all notifications & pairing access to their smartphones.)

 

 

Connect Your Smartwatch

New User:

1. To connect your smartwatch to your phone, select your style watch from the watch list (the list will appear after following step 4 above).
2. Select your specific watch on the next page (allow 15 seconds for watch to appear).
3. To confirm connection, tap and hold the Home button of the watch until it vibrates. This screen will show you a white Bluetooth icon when your watch is fully You can view the battery life of your smartwatch on this screen as well. If you do not see the white Bluetooth icon, reset your smartwatch and follow these steps again.

 

Returning User:

If you are on the Home page of the app, please follow the steps below to connect your smartwatch

1. Tap the smartwatch icon located at the top right-hand corner of the Home
2. Tap the SET UP A NEW DEVICE button
3. Select your style watch from the watch
4. Then, select your specific watch on the next page (allow 15 seconds for watch to appear). From the clock face on your device, tap and hold the Home button for 3 seconds to display the MAC ADDRESS of your iTouch Fuse. When pairing your smartwatch with the app, make sure that the MAC ADDRESS displayed on your smartwatch matches the MAC ADDRESS of the iTouch Fuse on your
5. To confirm connection, tap and hold the Home button of the watch until it This screen will

show you a white Bluetooth icon   when your watch is fully connected. You can view the battery life of your smartwatch on this screen as well. If you do not see the white Bluetooth icon, reset your smartwatch and follow these steps again.

 

Once your iTouch Fuse Smartwatch is connected, it will say Connected on the Account page in the app and display the current battery life of your smartwatch.

 

Watch Features

 

Control the brightness on your smartwatch. From the Settings menu on your iTouch Fuse, tap the Home button until you reach the Brightness screen. Then hold the Home button to begin adjusting the brightness by tapping the Home button.

Changing Watch Faces

Personalize your watch with our built-in watch faces, or explore other watch face designs to

showcase your favorite iTouch Fuse time-keeping features. The iTOUCH Wearables app comes with three interchangeable watch faces: Simple (yellow), Simple (blue) and Modern.

Change your watch face from the iTOUCH Wearables app:

1. With your smartwatch nearby, tap the menu icon in the top left corner of Home page
2. Once menu opens, tap settings
3. Tap Watch Faces to navigate to a selection of watch
4. Browse the available styles and select your preferred watch face. Once selected, your smartwatch will automatically update the clock

 

Change your watch face from the iTouch Fuse Smartwatch:

1. Navigate to the Settings menu on your iTouch Fuse and hold the Home button to open the Settings options
2. Tap the Home button until you reach the “Choose Clockface”
3. Tap the Home button to cycle through options and hold Home button on the highlighted option to set

 

Notifications & Messaging

iTouch Fuse can display call, text, social media, and app notifications from your smartphone to keep you informed. The smartwatch and phone device must be within Bluetooth range of each other to receive such notifications.

Set Up Notifications: Check that the Bluetooth on your phone is on and that your phone can receive notifications (often under Settings > Notifications). Then set up notifications:

1. From the iTOUCH Wearables app menu , tap Settings and then go to
2. From Notifications, you may select the notifications you wish to receive on your Note: Notification permissions differ between iOS and Android users. Go to Set up with your smartphone in the manual for more information.

Viewing Incoming Notifications: When your iTouch Fuse and smartphone are within range, notifications cause the smartwatch to vibrate. If you don’t read the notification when it arrives, you can check it later by navigating to Messages on your smartwatch.

To view unopened messages and notifications on your iTouch Fuse, tap the Home button until you reach the messages screen. Then tap and hold to open your messages. Tap the Home button, to cycle through your messages.

Turn off Notifications: Turn off all or certain notifications with the iTOUCH Wearables app from Notifi- cations in the settings section of the menu. You can mute all notifications by turning on Do Not Disturb mode. Learn more about the Do Not Disturb function in the Lifestyle Features section of the manual.

 

Activity & Sleep

iTouch Fuse continuously tracks a variety of stats whenever you wear it. The information is then transferred to the iTOUCH Wearables app every time you sync your smartwatch. We recommend syncing your smartwatch to the app at least once a day.

 

See your stats: steps taken, calories burned, distance covered, and active minutes. Find your complete history and other information automatically detected by your smartwatch, such as sleep data, in the iTOUCH Wearables app.

To see previous days stats tap the calendar icon        at the top left section of the Home page.

 

Track a daily step goal: iTouch Fuse tracks your progress towards a daily step goal.

 

Track Your Sleep: Your iTouch Fuse will automatically track your time asleep and sleep stages (deep sleep, light sleep, and total sleep). Sync your smartwatch when you wake up and check the app to see your sleep data.

 

Running Mode

For complete workout stats, recap, route and pace information, make sure to use your smartphone’s connected GPS. Review your exercise history via the iTOUCH Wearables app. Note: The Connected GPS feature on the iTouch Fuse works with the GPS sensors on your nearby smartphone.

 

To use Running Mode, tap the menu from the Home page, tap Settings and then tap Running Mode.

 

A new screen will appear with a start button. Tap Start to begin tracking your activity. Connected GPS mode will be enabled until you pause or completely stop. This screen will showcase your steps, pace, heart rate and calories burned. You will have an option to toggle between this screen and an actual live map of your route. Once completed, you can view your distance traveled.

 

 

SMARTWATCH REMOTE FEATURES

Music Remote

To remotely control your music from your smartwatch, hold   button on the Music feature on the smartwatch. The music remote allows you to Play/Pause, Skip Forward, or Skip to previous music from your music apps. Make sure that your music is already playing in order to utilize this function. Your iTouch Fuse is compatible with various applications such as Apple Music, Spotify, and Pandora. However, it may not support other third party applications.

 

Camera Remote

To access camera remote on iTouch Fuse, first open the camera app on your smartphone and hold the  button on the Camera feature on your smartwatch to snap a photo.

To snap photos using your iTouch Fuse, navigate to the Camera Remote feature on your smartwatch. If you are using an iOS device, you will also need to open the native camera app on your smartphone. If you are using an Android device, go to the menu on the Home page of the app. Then, go to Settings and tap Camera Remote to open up the camera.

Hold the  button on the Camera feature on your smartwatch to snap a photo, or turn on the Motion Gesture feature in the app and rotate your wrist to snap a pic.

 

In App Features

 

Alarms: Alarms vibrate to alert you at a time you have set. Set up to three alarms to occur once or on multiple days of the week via the iTOUCH Wearables app. Tap the menu icon in top left corner of Home page and go to Settings and then Alarms. To change the time format on your smartwatch, tap the menu and go to Settings. Tap Time Formats to select between 12 and 24 hour format.

 

You can also time events with the Stopwatch found in the Settings menu on your iTouch Fuse Smartwatch. Hold the Home button to open the Settings options. Hold the Home button on the Stopwatch screen to start the Stopwatch feature. Tap the Home button to Pause/Play. Hold Home button to stop Stopwatch.

 

Motion Gesture: Allows you to rotate your wrist to turn on your watch screen. Go to the menu on the Home page of your app and tap on Settings. Tap on the Motion Gesture option to turn on and turn off this feature. On the Motion Gesture page, you can control the time in which this feature is active through- out the day. If you want this feature to always be on, set the time constraints to be 12:00AM to 12:00AM. Using this feature will consume more battery.

 

Reminder To Move: Turn on reminders to move using your app, in settings. This feature is active during the hours of 10:00 AM - 6:00 PM. Once set, your watch will vibrate every 30 minutes of no activity.

 

 

Lifestyle Features

 

DO NOT DISTURB: You can mute all notifications right from your smartwatch. Go to the Settings menu and tap the Home button until you reach the ‘Do Not Disturb’ screen. Hold the Home button to activate Do Not Disturb mode.

The ‘Moon’ icon will turn blue once activated.

 

In the app: Tap Do Not Disturb and set a time period to prevent your smartwatch from receiving all notifications (other than alarms). Once active, it takes 3-5 minutes to begin working.

 

UNITS: Tap Units to change the units of measurement reflected on your smartwatch and in your app. Choose between the metric and imperial systems of measurement.

 

WEATHER: Once your smartwatch is fully paired to the app, the Weather feature will show on your iTouch Fuse. Your smartwatch shows the weather for today and updates hourly. To see the weather for tomorrow, hold the Home button on your smartwatch until it vibrates. To change from Fahrenheit to Cel- sius, navigate to Settings in the iTOUCH Wearables app and go to the Weather section. This will display the Weather on your watch for your current location.

 

TIME FORMAT: Tap Time Format under Settings to change the time format to 12 or 24 hours.

 

LANGUAGE: Tap Language to change the language on your device. Choose from a variety of languages.

 

FIND WATCH: Tap Find Watch under Settings to vibrate your iTouch Fuse Smartwatch when paired with the app.

 

WEAR AND CARE

 

All iTOUCH Wearable products are meant to be worn all day and night, so it’s important to follow a few simple guidelines as you wear and care for your device.

 

To keep your band clean and your skin happy, we recommend the following tips:

 

• Clean your band and wrist regularly - especially after intense workouts or
• Rinse the band with water or wipe it with a small amount of rubbing Do NOT use hand soap, dish soap, hand sanitizer, cleaning wipes or household cleaners, which could get trapped beneath the band and irritate your skin.
• Always pat dry the band before putting it back on

 

Note: Although the iTouch Fuse is IP67 water resistant, it is not IP68

water resistant which means you should not submerge your watch in water deeper than one meter for longer than 30 minutes. We advise not to swim with your smartwatch.

However, your iTouch Fuse can withstand many splashes, rain, and daily activities such as washing dishes. If your smartwatch gets wet, we advise you to remove

it until dry. It is not good for your skin to wear a wet band for long periods of time.

 

Make sure to wear your band loosely enough that it can move back and forth on your wrist. Prolonged rubbing and pressure may irritate the skin, so give your wrists a break by removing the band for an hour or two after extended wear.

 

IMPORTANT TIPS:

If you have allergies, asthma, or eczema, you may be more likely to experience a skin irritation or allergy from a wearable device. If you start to experience skin irritation or redness on your wrist, remove your device. Contact a dermatologist if symptoms persist longer than 2-3 days of not using your wearable device.

 

REGULATORY & SAFETY NOTICES

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 

• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

 

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operated in conjunction with any other antenna or transmitter.

 

FCC ID: 2ARUI3760N02

 

Click the link below to download the Manual for your iTouch Fuse.